Reliable Supplier 20411 Swaged Hose Fiting for Malaysia Factory
Reliable Supplier 20411 Swaged Hose Fiting for Malaysia Factory Detail:
O’RING METRIC FEMALE 24° CONE LIGHT TYPE DIN 3865 (DKOL)
PART NUMBER |
HOSE
|
THREAD T |
PIPE |
B mm |
L mm |
A mm |
H2 mm |
||
|
DN |
In |
SIZE |
|
|
|
|
|
|
S204A1 – 03 – 12 | 5 | 3/16″ | 03 | M12x1,5 | 6 | 3 | 24,1 | 1,2 | 14 |
S204A1 – 04 – 14 | 6 | 1/4″ | 04 | M14x1,5 | 8 | 4 | 24,5 | 1,8 | 17 |
S204A1 – 04 – 16 | 6 | 1/4″ | 04 | M16x1,5 | 10 | 5,5 | 26 | 2,3 | 19 |
S204A1 – 05 – 16 | 8 | 5/16″ | 05 | M16x1,5 | 10 | 5,5 | 26 | 2,3 | 19 |
S204A1 – 05 – 18 | 8 | 5/16″ | 05 | M18x1,5 | 12 | 7 | 26 | 2,5 | 22 |
S204A1 – 06 – 18 | 10 | 3/8″ | 06 | M18x1,5 | 12 | 7 | 26,6 | 2,5 | 22 |
S204A1 – 06 – 22 | 10 | 3/8″ | 06 | M22x1,5 | 15 | 9,5 | 30,1 | 2,5 | 27 |
S204A1 – 08 – 22 | 12 | 1/2″ | 08 | M22x1,5 | 15 | 9,3 | 29,3 | 2,5 | 27 |
S204A1 – 08 – 26 | 12 | 1/2″ | 08 | M26x1,5 | 18 | 12 | 31,3 | 2,5 | 32 |
S204A1 – 10 – 26 | 16 | 5/8″ | 10 | M26x1,5 | 18 | 12 | 30,3 | 2,5 | 32 |
S204A1 – 12 – 30 | 20 | 3/4″ | 12 | M30x2 | 22 | 15 | 33 | 3,5 | 36 |
S204A1 – 12 – 36 | 20 | 3/4″ | 12 | M36x2 | 28 | 19,5 | 34,5 | 3,7 | 41 |
S204A1 – 16 – 36 | 25 | 1″ | 16 | M36x2 | 28 | 19,5 | 34,3 | 3,7 | 41 |
S204A1 – 20 – 45 | 32 | 1.1/4″ | 20 | M45x2 | 35 | 26 | 39 | 4 | 50 |
S204A1 – 24 – 52 | 40 | 1.1/2″ | 24 | M52x2 | 42 | 32 | 39,5 | 4,5 | 60 |
S204A2 – 06 – 16 | 10 | 3/8″ | 06 | M16x1,5 | 10 | 5,5 | 23,6 | 2 | 19 |
Product detail pictures:
Related Product Guide:
How to Replace a Hydraulic Hose Fitting
Things to Know About Pipe Fitting Works
owing to fantastic assistance, a variety of high quality goods, aggressive rates and efficient delivery, we love a very good popularity among our customers. We are an energetic firm with wide market for Reliable Supplier 20411 Swaged Hose Fiting for Malaysia Factory, The product will supply to all over the world, such as: Mauritius, Orlando, Iran, Our company covers an area of 20, 000 square meters. We have more than 200 workers, professional technical team, 15 years' experience, exquisite workmanship, stable and reliable quality, competitive price and sufficient production capacity, this is how we make our customers stronger. If you have any inquiry, please do not hesitate to contact us.
This video shows you how to install locking type laminate under a door jam. Don’t try to do the last row and slide it under the jam. You need to place two rows into the space and cut the locking lip off the tongue of the second row from jam. Don’t remove the tongue, just the locking nib that runs along it. Place some glue on tongue. Press down while sliding into place. Remember you must have enough space so you can slide it all the way to the wall and then tap laminate towards you to lock in to place as shown. The previous owner left the large gap under the door I did not. You shouldn’t either.
S pumps, ranges 34-42
Table of contents:
Dismantling:
00:00 Removing the pump housing
00:22 Removing the impeller
01:04 Oil draining
01:35 Removing the shaft seal
03:50 Removing the shaft and rotor
16:55 Removing the motor cover
17:55 Removing the cable entry
19:20 Replacing moisture switch(es)
Assembly:
06:12 Fitting the bearings
08:57 Fitting the shaft seal
12:50 Pressure test and oil fill
14:54 Fitting the impeller
15:52 Fitting the pump housing
20:06 Fitting the cable entry
21:54 Fitting the motor cover
Recorded: May 2007
For more information please visit:
https://www.grundfos.com/service-support.html
By Nora from Grenada - 2017.10.23 10:29
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Penny from Latvia - 2017.03.28 16:34