Discountable price Ferrule for 4SH Supply to Dubai

FERRULE FOR SAE 4SH

UPDATE! Leak-B-Gone® Rings are intended to permanently repair leaks at PVC pipe joints where the glue has not adhered properly during install, or where the joint has come loose. When installed properly under the appropriate conditions, the Leak-B-Gone ring could save you hundreds of dollars and hours of time cutting out and replacing leaking PVC pipe! Leak-B-Gone, however, does not work for all applications. Before you buy, we wanted to make you aware of some instances where Leak-B-Gone might not work for you.

Important Information to consider before purchasing Leak-B-Gone:
1. Pipe Diameter:
It is crucial that you properly measure the outside diameter of your pipe, and use the chart (visit https://www.kinginnovation.com/products/83/leak-b-gone) to determine what size Leak-B-Gone you will need. If the incorrect size is chosen, then Leak-B-Gone will NOT stop your leak!
2. Clean Pipe:
Leak-B-Gone MUST be installed on a CLEAN pipe (see video application). If a pipe already has buildup (residue, glue, mud, etc.) around the fitting, then Leak-B-Gone will NOT stop your leak!
3. Dry Pipe:
Leak-B-Gone must be installed on a pipe that is as DRY as possible. If a pipe is too wet the glue may not properly adhere and Leak-B-Gone will NOT stop your leak!
4. Install Away from Glue:
Once primer and glue have been applied, Leak-B-Gone must be wrapped around your pipe and latched AWAY from the glue. You may then slide the ring over towards your pipe fitting/leak. If Leak-B-Gone is installed over the glue, it may become prematurely stuck to the pipe and will NOT stop your leak!
5. Leak Location:
Leak-B-Gone is designed to stop leaks that have occurred at the pipe joint. If your pipe is leaking elsewhere, then Leak-B-Gone will NOT stop your leak!
6. Multiple Rings:
Depending on the size of your leak, you may need multiple Leak-B-Gone rings to properly stop the flow of water. If too few rings are used for a larger leak, then Leak-B-Gone may NOT stop your leak!
7. Latching:
If you are having trouble latching the Leak-B-Gone ring, tools may be required or you may have the incorrect size. If the Leak-B-Gone ring is not latched properly during install, then Leak-B-Gone may NOT stop your leak!

If you are having difficulty determining whether Leak-B-Gone is the right solution for your leak, or if you need help selecting the appropriate size for your pipe, we are here to help! Contact us via phone (636-519-5400) or email (customerservice@kinginnovation.com) and we can answer any questions you might have.

We are often asked if Hoselink no burst connections can be used with poly-pipe. We’re happy to state that they do and without the leaks or bursting you might expect from other connection types.

This video demonstrates how to fit Hoselink to poly pipe or a thin walled hose by cutting the split ring to allow it to grab onto the smaller diameter. This modification takes only a minute and works like a charm.