Popular Design for 1C Metric Thread Bite Type Tube Fitting for Paris Factories
Popular Design for 1C Metric Thread Bite Type Tube Fitting for Paris Factories Detail:
STRAIGHT REDUCERS
PART NOMBER
|
MPa
|
ØO D. |
L1 |
L1 |
S1 |
S2 |
S3 |
bar
|
|
1C-08-06L |
L |
08 |
06 |
40 |
11.0 |
14 | 14 | 17 | 315 |
1C-10-06L |
|
10 |
06 |
41 |
12.0 |
17 | 14 | 19 | 315 |
1C-10-08L |
|
10 |
08 |
41 |
12.0 |
17 | 17 | 19 | 315 |
1C-12-06L |
|
12 |
06 |
42 |
13.0 |
19 | 14 | 22 | 315 |
1C-12-08L |
|
12 |
08 |
42 |
13.0 |
19 | 17 | 22 | 315 |
1C-12-10L |
|
12 |
10 |
43 |
14.0 |
19 | 19 | 22 | 315 |
1C-15-10L |
|
15 |
10 |
45 |
15.0 |
24 | 19 | 27 | 315 |
1C-15-12L |
|
15 |
12 |
45 |
15.0 |
24 | 22 | 27 | 315 |
1C-18-10L |
|
18 |
10 |
46 |
15.5 |
27 | 19 | 32 | 315 |
1C-18-12L |
|
18 |
12 |
46 |
15.5 |
27 | 22 | 32 | 315 |
1C-18-15L |
|
18 |
15 |
48 |
16.5 |
27 | 27 | 32 | 315 |
1C-22-12L |
|
22 |
12 |
48 |
17.5 |
32 | 22 | 36 | 160 |
1C-22-15L |
|
22 |
15 |
50 |
18.5 |
32 | 27 | 36 | 160 |
1C-22-18L |
|
22 |
18 |
50 |
18.0 |
32 | 32 | 36 | 160 |
1C-28-18L |
|
28 |
18 |
52 |
19.0 |
41 | 32 | 41 | 160 |
1C-28-22L |
|
28 |
22 |
54 |
21.0 |
41 | 36 | 41 | 160 |
1C-35-22L |
|
35 |
22 |
59 |
21.0 |
46 | 36 | 50 | 160 |
1C-35-28L |
|
35 |
28 |
59 |
21.0 |
46 | 41 | 50 | 160 |
1C-42-35L |
|
42 |
35 |
66 |
21.5 |
55 | 50 | 60 | 160 |
Product detail pictures:
Related Product Guide:
Tube Fittings and Pipe Fittings – Double Ferrule Tube Fittings
Things to Know About Pipe Fitting Works
We stick to the principle of quality first, service first, continuous improvement and innovation to meet the customers for the management and zero defect, zero complaints as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Popular Design for 1C Metric Thread Bite Type Tube Fitting for Paris Factories, The product will supply to all over the world, such as: Kyrgyzstan, Singapore, Marseille, We strive for excellence, constant improvement and innovation, is committed to make us the customer trust and the first choice of engineering machinery accessories brand suppliers. Choose us, sharing a win-win situation!
Always fit your ignition coil with the 3 wires first. RED, GREEN AND BLACK. Then run the bike.
Once the bike is running fine on the 3 wires , connect the following wires , , ORANGE-kill , BLACK-earth after all the wires and plug cap is connected start your bike. The coil will work fine.
if it doesnt you have problems with your 2 wires on your bike that you have attached (kill/earth) to the last 2 wires from the coil. Usually it is the bikes KILL WIRE that is faulty and this will NOT allow a spark.
By Elma from Jersey - 2018.09.16 11:31
It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
By Renee from Madagascar - 2018.09.16 11:31