China Factory for 29611 Swaged Hose Fiting Export to United Arab emirates
China Factory for 29611 Swaged Hose Fiting Export to United Arab emirates Detail:
J.I.S. FEMALE 60° CONE SEAT TYPE F (CRIMPED – BACK NUT)
PART NUMBER |
HOSE
|
THREAD T |
B mm |
L mm |
A mm |
H1 mm |
H2 mm |
||
|
DN |
In |
SIZE |
|
|
|
|
|
|
S296A3 – 04 – 04D | 6 | 1/4″ | 04 | 1/4″ – 19 | 4 | 21 | 8,5 | 17 | 19 |
S296A3 – 06 – 06D | 10 | 3/8″ | 06 | 3/8″ – 19 | 7 | 22,1 | 9 | 19 | 22 |
S296A3 – 08 – 08D | 12 | 1/2″ | 08 | 1/2″ – 14 | 9,3 | 22,8 | 11 | 22 | 27 |
S296A3 – 12 – 12D | 20 | 3/4″ | 12 | 3/4″ – 14 | 15 | 26 | 13,5 | 30 | 36 |
S296A3 – 16 – 16D | 25 | 1″ | 16 | 1″ – 11 | 19,5 | 30,8 | 14 | 36 | 41 |
Product detail pictures:
Related Product Guide:
Things to Know About Pipe Fitting Works
How to Replace a Hydraulic Hose Fitting
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of China Factory for 29611 Swaged Hose Fiting Export to United Arab emirates, The product will supply to all over the world, such as: United Arab Emirates, Sevilla, Jakarta, Our factory insists on the principle of Quality First, Sustainable Development, and takes Honest Business, Mutual Benefits as our developable goal. All members sincerely thanks for all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.Thanks.
Enermax expands its product range with two new products: The NEOChanger – a reservoir with integrated performance pump and RGB lighting for the use with DIY water cooling systems and the D.F. Storm – an industrial high-speed fan with selectable speed of up to 3.500 RPM. With both products, Enermax is expanding the product portfolio for performance cooling hardware. The NEOChanger pump-combo-kit is available in three different models (200ml, 300ml and 400ml) to meet the requirements of every system.Supporting standard G 1/4″ fittings the NEOChanger can be combined with almost all DIY cooling products on the market.Designed for case modding the reservoir is made of transparent acrylic glass and a black aluminium casing for the pump, providing a significant outlook. The NEOChanger is equipped with a powerful pump with a flow rate of 900 L/h and a strong hydraulic head of 5.2m. The RPM of the pump can be adjusted via the included IR remote control up to a maximum of 4.000 RPM. This high performance allows the build of a custom loop with multiple radiators and coolers.
100mm Lugged Butterfly Valve (4″) Table E/PN16 Lever operated.
Defender Valves are distributed in Australia by Dewater Products Pty Ltd.
The Lug type butterfly valve can be fitted to the end of a pipeline where there is no requirement for two pipeline flanges on each side of the valve. The lug type butterfly valve can be fitted between two pipe flanges with two sets of fasteners on each side of the valve screwed into the valve halfway.
Available from DEWATER PRODUCTS in Perth, Western Australia, email: sales@dewaterproducts.com.au for more information.
The Butterfly Valve is a valve which has a disc that swings on a spindle shaft like a butterfly wing hence the name Butterfly Valve. The disc is mounted inside a pipe (valve body) in order to control flow and seal on a lining when closed. Connection varies depending on the valve type and can be wafer between the two pipe flanges, lugged to fasten onto a pipe flange, flanged, threaded and grooved. The Butterfly Valve is commonly opened and closed using a lever handle. In larger sizes above 200mm, then it is more common for a worm gear drive and hand wheel to be installed, as it allows for easier opening and closing for the operator. Larger Valves become harder to close with a lever handle because of the flow and volume of fluid moving in the pipe. The operator will find it much easier using a hand wheel, with geared reduction. Another common way for a butterfly valve to be opened and closed is with an Actuator. Actuators can be Pneumatic, Electric or Hydraulic. The cost varies for each type of actuator.
The seal material on butterfly valves are an important element for the correct function of a butterfly valve. The seal needs to withstand any potential damage from heat and chemicals being pumped. There are a range of seal materials available.
Our range of Butterfly Valves are CE approved, ISO approved, API-6D approved.
Dewater Products Pty Ltd supply Butterfly Valves in all sizes, types and classes. Please contact us if you require a certain type of Valve.
By Laura from Slovakia - 2017.08.18 18:38
This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
By Lesley from Provence - 2017.07.07 13:00