Super Purchasing for 29611 Swaged Hose Fiting to Czech republic Factories

Short Description:

J.I.S. FEMALE 60° CONE SEAT TYPE F (CRIMPED – BACK NUT)    PART NUMBER HOSE THREAD T B mm L mm A mm H1 mm H2 mm   DN In SIZE             S296A3 – 04 – 04D 6 1/4″ 04 1/4″ – 19 4 21 8,5 17 19 S296A3 – 06 – 06D 10 3/8″ 06 3/8″ – 19 7 22,1 9 19 22 S296A3 – 08 – 08D 12 1/2″ 08 1/2″ – 14 9,3 22,8 11 22 27 S296A3 – 12 – 12D 20 3/4″ 12 3/4″ – 14...


Product Detail

Product Tags

Related Video

Feedback (2)

We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for Parker Hydraulic Fittings To Norwegians, Split Slip On Flange, Hydraulic Adapter Sleeve, Our tenet is evident all of the time: to deliver high quality solution at competitive price tag to clients throughout the planet. We welcome potential customers to get in touch with us for OEM and ODM orders.
Super Purchasing for 29611 Swaged Hose Fiting to Czech republic Factories Detail:

J.I.S. FEMALE 60° CONE SEAT TYPE F (CRIMPED – BACK NUT)

2

 

 PART NUMBER

HOSE

THREAD

T

B

mm

L

mm

A

mm

H1

mm

H2

mm

 

DN

In

SIZE

 

 

 

 

 

 

S296A3 – 04 – 04D 6 1/4″ 04 1/4″ – 19 4 21 8,5 17 19
S296A3 – 06 – 06D 10 3/8″ 06 3/8″ – 19 7 22,1 9 19 22
S296A3 – 08 – 08D 12 1/2″ 08 1/2″ – 14 9,3 22,8 11 22 27
S296A3 – 12 – 12D 20 3/4″ 12 3/4″ – 14 15 26 13,5 30 36
S296A3 – 16 – 16D 25 1″ 16 1″ – 11 19,5 30,8 14 36 41

Product detail pictures:

Super Purchasing for 29611 Swaged Hose Fiting to Czech republic Factories detail pictures


Related Product Guide:
Things to Know About Pipe Fitting Works
How to Replace a Hydraulic Hose Fitting

With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Super Purchasing for 29611 Swaged Hose Fiting to Czech republic Factories, The product will supply to all over the world, such as: Grenada, Buenos Aires, Nairobi, Our company covers an area of 20, 000 square meters. We have more than 200 workers, professional technical team, 15 years' experience, exquisite workmanship, stable and reliable quality, competitive price and sufficient production capacity, this is how we make our customers stronger. If you have any inquiry, please do not hesitate to contact us.


  • In this video we show How to replace the oxygen (O2) sensor also known has Air Fuel Ratio sensor on the Nissan Frontier V6 (3300 – VG33E) engine.Here you will see the difference between Bank #1 (right side)and Bank #2(left side) heated (4-wire) oxygen sensors. Replacing the oxygen sensor every 60-70,000 miles is an effort to help conserve fuel/gasoline.The oxygen sensor are not the only device to harness against waste consumption. The coolant temperature sensor at the thermostat housing reports to the computer, the computer commands the cooling fans through the fuel/relay box. Some model will be equipped with dual cooling fans. One for normal operation is the 1st fan. The 2nd fan is for air condition operation and over-heating conditions. If the Tstat remain stuck “close” the two fan will operate and coolant will overflow in its reserve container. The Tstat ONLY control engine temperature. The fans operation and gauge help radiates any heat or over heating base on ambient air temperature and operator.

    The oxygen sensor is a state EPA “enviromental term” all so known has a EGT – exhaust gas temperature sensor sends millivoltage(data) to the ecm – engine control module for fuel injector control and its flow rate(impedeance). The oxygen sensor key roll is to measure the combustion flame/temperature .the ideal temperature for anything above 75% throttle is .870mv – .900mv output at the exhaust gas temperature/oxygen sensor. The oxygen(o2) sensor also work in conjuction with the Mass Air Flow Meter/sensor for fuel injector control. So the oxygen sensor can also be conside a Air Fuel Ratio sensor and the Mass Air Flow meter is mounted on the intake manifold duct.

    M18 sensors – Install finger tight then 1/2 – 3/4 turn with wrench/ O2 sensor socket.26-33ft. lbs
    M12 sensors – Install finger tight then 3/4 – 1 turn with wrench / O2 sensor socket.13.2-17ft. lbs.

    APPLICATION: 2003 NISSAN FRONTIER EX, Xterra
    3300 CC ENGINE 4X4

    PLEASE – RATE – COMMENT AND SUBSCRIBE.

    * DO NOT drop or use an oxygen sensor that has been dropped as this may have caused shock damage to the ceramic cell.
    * DO NOT use any compound on or around the sensor unless labeled as oxygen sensor friendly products.
    * DO NOT use impact wrench or conventional socket type wrench to install sensor.
    * DO NOT allow sensor or lead wire to touch exhaust manifold or any other hot component.
    * DO NOT expose this product to water,oil,windshield cleaner, anti-corrosion oil,grease,terminal cleaner, etc.
    * DO NOT use leaded fuels, silicone or metal based additives
    * DO NOT store under high humidity conditions will promote rusting.
    WARNING : Anti-seize compound may cause irritation to the skin or eyes. In case of contact, wash affected area with soap and water. In case of eye contact, Flush with water for 15 minutes. If irritation persists, consult a physician. If swallowed, DO NOT induce vomiting.

    KEEP OUT OF REACH OF CHILDREN.

    We have been looking for a professional and responsible supplier, and now we find it.
    5 Stars By Julia from Amsterdam - 2018.10.31 10:02
    This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Zoe from Japan - 2017.09.16 13:44

    Related Products

    WhatsApp Online Chat !