Professional Manufacturer for 22613-Interlock Hose Fitting to Slovenia Factory

Short Description:

BSP O’RING FEMALE 60° CONE SEAT   PART NUMBER HOSE THREAD T B mm L mm A mm H1 mm H2 mm   DN In SIZE             H226A2 – 10 – 10 16 5/8″ 10 5/8″ – 14 12 25,4 9,7 30 30 H226A2 – 12 – 12 20 3/4″ 12 3/4″ – 14 15 30,9 9 32 32 H226A2 – 16 – 16 25 1″ 16 1″ – 11 19 33,7 10,5 41 41 H226A2 – 20 – 20 32 1.1/4″ 20 1.1/4″ – 11...


Product Detail

Product Tags

Related Video

Feedback (2)

It is our responsibility to meet your needs and efficiently serve you. Your satisfaction is our best reward. We are looking forward to your visit for joint growth for Hose Adapter Fittings, Hydraulic Oil Pipe Fitting, Garden Hose Fittings, We will empower people by communicating and listening, Setting an example to others and learning from experience.
Professional Manufacturer for 22613-Interlock Hose Fitting to Slovenia Factory Detail:

BSP O’RING FEMALE 60° CONE SEAT

28

 

PART NUMBER

HOSE

THREAD

T

B

mm

L

mm

A

mm

H1

mm

H2

mm

 

DN

In

SIZE

 

 

 

 

 

 

H226A2 – 10 – 10 16 5/8″ 10 5/8″ – 14 12 25,4 9,7 30 30
H226A2 – 12 – 12 20 3/4″ 12 3/4″ – 14 15 30,9 9 32 32
H226A2 – 16 – 16 25 1″ 16 1″ – 11 19 33,7 10,5 41 41
H226A2 – 20 – 20 32 1.1/4″ 20 1.1/4″ – 11 26 41,3 10,1 50 50
H226A2 – 24 – 24 40 1.1/2″ 24 1.1/2″ – 11 32 43,9 12,5 55 55
H226A2 – 32 – 32 50 2″ 32 2″ – 11 42 50,1 16,1 70 70

Product detail pictures:

Professional Manufacturer for 22613-Interlock Hose Fitting to Slovenia Factory detail pictures

Professional Manufacturer for 22613-Interlock Hose Fitting to Slovenia Factory detail pictures


Related Product Guide:
Things to Know About Pipe Fitting Works
How to Replace a Hydraulic Hose Fitting

The corporate keeps towards the operation concept scientific administration, superior quality and performance primacy, client supreme for Professional Manufacturer for 22613-Interlock Hose Fitting to Slovenia Factory, The product will supply to all over the world, such as: Turkmenistan, Irish, Honduras, We guarantee that our company will try our best to reduce customer purchase cost , shorten the period of purchase , stable products quality , increase customers' satisfaction and achieve win-win situation .


  • In this video we show How to replace the oxygen (O2) sensor also known has Air Fuel Ratio sensor on the Nissan Frontier V6 (3300 – VG33E) engine.Here you will see the difference between Bank #1 (right side)and Bank #2(left side) heated (4-wire) oxygen sensors. Replacing the oxygen sensor every 60-70,000 miles is an effort to help conserve fuel/gasoline.The oxygen sensor are not the only device to harness against waste consumption. The coolant temperature sensor at the thermostat housing reports to the computer, the computer commands the cooling fans through the fuel/relay box. Some model will be equipped with dual cooling fans. One for normal operation is the 1st fan. The 2nd fan is for air condition operation and over-heating conditions. If the Tstat remain stuck “close” the two fan will operate and coolant will overflow in its reserve container. The Tstat ONLY control engine temperature. The fans operation and gauge help radiates any heat or over heating base on ambient air temperature and operator.

    The oxygen sensor is a state EPA “enviromental term” all so known has a EGT – exhaust gas temperature sensor sends millivoltage(data) to the ecm – engine control module for fuel injector control and its flow rate(impedeance). The oxygen sensor key roll is to measure the combustion flame/temperature .the ideal temperature for anything above 75% throttle is .870mv – .900mv output at the exhaust gas temperature/oxygen sensor. The oxygen(o2) sensor also work in conjuction with the Mass Air Flow Meter/sensor for fuel injector control. So the oxygen sensor can also be conside a Air Fuel Ratio sensor and the Mass Air Flow meter is mounted on the intake manifold duct.

    M18 sensors – Install finger tight then 1/2 – 3/4 turn with wrench/ O2 sensor socket.26-33ft. lbs
    M12 sensors – Install finger tight then 3/4 – 1 turn with wrench / O2 sensor socket.13.2-17ft. lbs.

    APPLICATION: 2003 NISSAN FRONTIER EX, Xterra
    3300 CC ENGINE 4X4

    PLEASE – RATE – COMMENT AND SUBSCRIBE.

    * DO NOT drop or use an oxygen sensor that has been dropped as this may have caused shock damage to the ceramic cell.
    * DO NOT use any compound on or around the sensor unless labeled as oxygen sensor friendly products.
    * DO NOT use impact wrench or conventional socket type wrench to install sensor.
    * DO NOT allow sensor or lead wire to touch exhaust manifold or any other hot component.
    * DO NOT expose this product to water,oil,windshield cleaner, anti-corrosion oil,grease,terminal cleaner, etc.
    * DO NOT use leaded fuels, silicone or metal based additives
    * DO NOT store under high humidity conditions will promote rusting.
    WARNING : Anti-seize compound may cause irritation to the skin or eyes. In case of contact, wash affected area with soap and water. In case of eye contact, Flush with water for 15 minutes. If irritation persists, consult a physician. If swallowed, DO NOT induce vomiting.

    KEEP OUT OF REACH OF CHILDREN.

    The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Cherry from Houston - 2017.02.14 13:19
    This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Roberta from Montpellier - 2018.06.09 12:42

    Related Products

    WhatsApp Online Chat !