Popular Design for 20191-T Swaged Hose Fiting to United Kingdom Importers
Popular Design for 20191-T Swaged Hose Fiting to United Kingdom Importers Detail:
90°METRIC FEMALE MULTISEAL
PART NUMBER |
HOSE
|
S1 mm |
L mm |
H |
||
|
DN |
THREAD T |
DASH |
|
|
|
S20191-12-04 | 6 | M12×1.5 | 17 | 19.5 | 32 | |
S20191-14-04T | 6 | M14×1.5 | 17 | 19.5 | 35.5 | |
S20191-14-05 | 8 | M14×1.5 | 19 | 19.5 | 40.5 | |
S20191-16-04T | 6 | M16×1.5 | 19 | 20 | 34.5 | |
S20191-16-05T | 8 | M16×1.5 | 19 | 20 | 41 | |
S20191-18-06T | 10 | M18×1.5 | 22 | 20.5 | 44.5 | |
S20191-18-08 | 13 | M18×1.5 | 24 | 22 | 50 | |
S20191-22-08T | 13 | M22×1.5 | 27 | 22.8 | 52 | |
S20191-24-10 | 16 | M24×1.5 | 30 | 25.5 | 56.5 | |
S20191-27-10T | 16 | M27×1.5 | 32 | 23.5 | 54 | |
S20191-30-12T | 19 | M30×2 | 36 | 24.5 | 67 | |
S20191-39-16T | 25 | M39×2 | 46 | 29.5 | 72 | |
S20191-45-20T | 32 | M45×2 | 55 | 31.5 | 85 | |
S20191-52-24T | 38 | M52×2 | 60 | 33 | 100 |
Product detail pictures:
Related Product Guide:
Importance of PVC Fittings
Tube Fittings and Pipe Fittings – Double Ferrule Tube Fittings
To be the stage of realizing dreams of our employees! To build a happier, more united and more professional team! To reach a mutual benefit of our customers, suppliers, the society and ourselves for Popular Design for 20191-T Swaged Hose Fiting to United Kingdom Importers, The product will supply to all over the world, such as: Mauritius, Denver, Frankfurt, We always insist on the management tenet of Quality is First, Technology is Basis, Honesty and Innovation.We are able to develop new products continuously to a higher level to satisfy different needs of customers.
Our car tuning website https://www.comkotes-tuning.co.uk
Follow us on Facebook @ComkotesTuning
TMSR1 Induction kit
We were the first to design and develop a performance induction kit for the Peugeot 208 Gti that increases throttle response, power, torque, turbo spool rate and sound without requiring engine remapping so not cause a Check Engine Light (CEL).
Utilising our knowledge about airflow so to increase performance took us back to the drawing board for the TMSR1 induction kit. During extensive testing and development we ensured by using two load dyno’s for 8 hours that our kit delivers more power and torque on all the maps we could test it with and none required a custom remap on the ECU. TMSR1 was also road tested for 23’000km using 3 cars with various modifications and maps including ome.
· Reduction in turbo spool rates of up to 15%
· Increased power and torque
· Improved throttle response
· Heightened induction sound
Our induction kits have been fitted to cars running ome and for those with stage 1, stage 2, stage 3 and stage 4 modifications. TMSR1 has since been improved for performance and replaced with TMSR2 which fits both Euro 5 (200THP) and Euro 6(208THP including 30th and PS models)
As an example from our load dyno testing program a stage 1 that was previously fitted with an aftermarket panel filter and ome airbox showed once TMSR1 was fitted an average gain in peak power of 9.85hp and 31.5nm of peak torque although every setup and modification can be unique to each car. Please see our load dyno comparisons for further information on performance gains.
TMSR2 comes complete with Pipercross performance cone filter, a new larger upper airbox that has our performance increasing design within it, fitting guide and stickers. Its plug and play and requires 15-20 minutes to install.
Why not take a look our 208 GTi remap videos .
By Joyce from Morocco - 2018.07.12 12:19
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Honey from Juventus - 2017.05.02 11:33