OEM Supplier for 1CB-Metric Thread Bite Type Tube Fitting to Ghana Factory
OEM Supplier for 1CB-Metric Thread Bite Type Tube Fitting to Ghana Factory Detail:
SP THREAD STUD ENDS WITH ED-RING SEALING
PART NOMBER | Mpa | TUBE O D. | G | L1 | l1 | i | S2 | S1 | d7 | bar |
1CG-06L-02ED | L | 06 | G1/8A | 23 | 8.5 | 8 | 14 | 14 | 14 | 315 |
1CG-06L-04ED | 06 | G1/4A | 25 | 10.0 | 12 | 14 | 19 | 19 | 315 | |
1CG-06L-06ED | 06 | G3/8A | 26 | 11.5 | 12 | 14 | 22 | 22 | 315 | |
1CG-06L-08ED | 06 | G1/2A | 27 | 12.0 | 14 | 14 | 27 | 27 | 315 | |
1CG-08L-04ED | 08 | G1/4A | 25 | 10.0 | 12 | 17 | 19 | 19 | 315 | |
1CG-08L-06ED | 08 | G3/8A | 26 | 11.5 | 12 | 17 | 22 | 22 | 315 | |
1CG-08L-08ED | 08 | G1/2A | 27 | 12.0 | 14 | 17 | 27 | 27 | 315 | |
1CG-10L-04ED | 10 | G1/4A | 26 | 11.0 | 12 | 19 | 19 | 19 | 315 | |
1CG-10L-06ED | 10 | G3/8A | 27 | 12.5 | 12 | 19 | 22 | 22 | 315 | |
1CG-10L-08ED | 10 | G1/2A | 28 | 13.0 | 14 | 19 | 27 | 27 | 315 | |
1CG-12L-04ED | 12 | G1/4A | 27 | 12.0 | 12 | 22 | 19 | 19 | 315 | |
1CG-12L-06ED | 12 | G3/8A | 27 | 12.5 | 12 | 22 | 22 | 22 | 315 | |
1CG-12L-08ED | 12 | G1/2A | 28 | 13.0 | 14 | 22 | 27 | 27 | 315 | |
1CG-12L-12ED | 12 | G3/4A | 29 | 14.0 | 16 | 22 | 32 | 32 | 315 | |
1CG-15L-06ED | 15 | G3/8A | 29 | 13.5 | 12 | 27 | 24 | 22 | 315 | |
1CG-15L-08ED | 15 | G1/2A | 29 | 14.0 | 14 | 27 | 27 | 27 | 315 | |
1CG-15L-12ED | 15 | G3/4A | 30 | 15.0 | 16 | 27 | 32 | 32 | 315 | |
1CG-18L-06ED | 18 | G3/8A | 30 | 14.0 | 12 | 32 | 27 | 22 | 315 | |
1CG-18L-08ED | 18 | G1/2A | 31 | 14.5 | 14 | 32 | 27 | 27 | 315 | |
1CG-18L-12ED | 18 | G3/4A | 31 | 14.5 | 16 | 32 | 32 | 32 | 315 | |
1CG-22L-08ED | 22 | G1/2A | 33 | 16.5 | 14 | 36 | 32 | 27 | 160 | |
1CG-22L-12ED | 22 | G3/4A | 33 | 16.5 | 16 | 36 | 32 | 32 | 160 | |
1CG-22L-16ED | 22 | G1A | 34 | 17.5 | 18 | 36 | 41 | 40 | 160 | |
1CG-28L-12ED | 28 | G3/4A | 34 | 17.5 | 16 | 41 | 41 | 32 | 160 | |
1CG-28L-16ED | 28 | G1A | 34 | 17.5 | 18 | 41 | 41 | 40 | 160 | |
1CG-28L-20ED | 28 | G1-1/4A | 35 | 18.5 | 20 | 41 | 50 | 50 | 160 | |
1CG-35L-16ED | 35 | G1A | 39 | 17.5 | 18 | 50 | 46 | 40 | 160 | |
1CG-35L-20ED | 35 | G1-1/4A | 39 | 17.5 | 20 | 50 | 50 | 50 | 160 | |
1CG-35L-24ED | 35 | G1-1/2A | 41 | 19.5 | 22 | 50 | 55 | 55 | 160 | |
1CG-42L-16ED | 42 | G1A | 42 | 19.0 | 18 | 60 | 55 | 40 | 160 | |
1CG-42L-20ED | 42 | G1-1/4A | 42 | 19.0 | 20 | 60 | 55 | 50 | 160 | |
1CG-42L-24ED | 42 | G1-1/2A | 42 | 19.0 | 22 | 60 | 55 | 55 | 160 |
Product detail pictures:
Related Product Guide:
Importance of PVC Fittings
Tube Fittings and Pipe Fittings – Double Ferrule Tube Fittings
We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for OEM Supplier for 1CB-Metric Thread Bite Type Tube Fitting to Ghana Factory, The product will supply to all over the world, such as: Orlando, Estonia, Provence, Our company has already had a lot of top factories and professional technology teams in China, offering the best products, techniques and services to worldwide customers. Honesty is our principle, professional operation is our work, service is our goal, and customers' satisfaction is our future!
Always fit your ignition coil with the 3 wires first. RED, GREEN AND BLACK. Then run the bike.
Once the bike is running fine on the 3 wires , connect the following wires , , ORANGE-kill , BLACK-earth after all the wires and plug cap is connected start your bike. The coil will work fine.
if it doesnt you have problems with your 2 wires on your bike that you have attached (kill/earth) to the last 2 wires from the coil. Usually it is the bikes KILL WIRE that is faulty and this will NOT allow a spark.
By Aaron from Irish - 2018.04.25 16:46
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Catherine from Kazakhstan - 2017.10.27 12:12