OEM Factory for 20291 Swaged Hose Fiting for London Factories
OEM Factory for 20291 Swaged Hose Fiting for London Factories Detail:
90°METRIC FEMALE FLAT SEAT
|
PART NUMBER |
HOSE
|
THREAD T |
B mm |
L mm |
A mm |
M mm |
H2 mm |
||
|
|
DN |
In |
SIZE |
|
|
|
|
|
|
| S202B1 – 04 – 14 | 6 | 1/4″ | 04 | M14X1.5 | 4 | 28 | 8 | 26.5 | 17 |
| S202B1 – 04 – 16 | 6 | 1/4″ | 04 | M16X1.5 | 7 | 28 | 8 | 26.5 | 19 |
| S202B1 – 05 – 16 | 8 | 5/16″ | 05 | M16X1.5 | 7 | 31 | 8 | 30 | 19 |
| S202B1 – 06 – 18 | 10 | 3/8″ | 06 | M18X1.5 | 9,5 | 34 | 8 | 32.5 | 22 |
| S202B1 – 08 – 22 | 12 | 1/2″ | 08 | M22X1.5 | 9,3 | 40 | 10 | 33,8 | 27 |
| S202B1 – 10 – 27 | 16 | 5/8″ | 10 | M27X1.5 | 15 | 48 | 10 | 42,8 | 32 |
| S202B1 – 12 – 30 | 20 | 3/4″ | 12 | M30X1.5 | 15 | 55 | 11 | 51,8 | 36 |
| S202B1 – 12 – 36 | 20 | 3/4″ | 12 | M36X2 | 19,5 | 55 | 13 | 50,7 | 41 |
| S202B1 – 16 – 39 | 25 | 1″ | 16 | M39X2 | 19,5 | 73 | 13 | 63 | 46 |
| S202B1 – 20 – 45 | 32 | 1.1/4″ | 20 | M45X2 | 25 | 88,9 | 15 | 73,4 | 50 |
| S202B1 – 24 – 52 | 40 | 1.1/2″ | 24 | M52X2 | 32 | 103 | 17 | 88 | 60 |
Product detail pictures:
Related Product Guide:
Understanding Hydraulic Hose Fittings
Importance of PVC Fittings
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of OEM Factory for 20291 Swaged Hose Fiting for London Factories, The product will supply to all over the world, such as: Atlanta, Finland, Mombasa, Our factory insists on the principle of Quality First, Sustainable Development, and takes Honest Business, Mutual Benefits as our developable goal. All members sincerely thanks for all old and new customers' support. We will keep working hard and offering you the highest-quality products and service.Thanks.
Cotter joint is used to connect two rods subjected to axial tensile or compressive loads. … The cotter is tightly fitted in this slot. Spigot fits inside the socket and the …
SL1, SLV – pump with water-in-oil sensor
Table of contents:
Dismantling:
00:04 Removing the cable
00:31 Removing the pump housing
01:06 Removing the impeller
01:37 Draining the oil
03:32 Removing the shaft seal
05:04 Removing the shaft with bearings and rotor
06:54 Removing the WIO-sensor and moisture switch
07:46 Removing the bearings
Assembly:
08:56 Fitting the bearings
10:17 Fitting the WIO-sensor and moisture switch
15:18 Fitting the shaft with bearings and rotor
17:28 Fitting the shaft seal
20:11 Filling with oil
21:13 Fitting the impeller
22:32 Fitting the pump housing
23:17 Fitting the cable
Modified: December 2015
For more information please visit:
https://www.grundfos.com/service-support.html
By Meroy from Swaziland - 2017.08.16 13:39
We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
By Belle from Curacao - 2018.12.22 12:52
