OEM Customized wholesale 20191-T Swaged Hose Fiting for Bulgaria Factory
OEM Customized wholesale 20191-T Swaged Hose Fiting for Bulgaria Factory Detail:
90°METRIC FEMALE MULTISEAL
PART NUMBER |
HOSE
|
S1 mm |
L mm |
H |
||
|
DN |
THREAD T |
DASH |
|
|
|
S20191-12-04 | 6 | M12×1.5 | 17 | 19.5 | 32 | |
S20191-14-04T | 6 | M14×1.5 | 17 | 19.5 | 35.5 | |
S20191-14-05 | 8 | M14×1.5 | 19 | 19.5 | 40.5 | |
S20191-16-04T | 6 | M16×1.5 | 19 | 20 | 34.5 | |
S20191-16-05T | 8 | M16×1.5 | 19 | 20 | 41 | |
S20191-18-06T | 10 | M18×1.5 | 22 | 20.5 | 44.5 | |
S20191-18-08 | 13 | M18×1.5 | 24 | 22 | 50 | |
S20191-22-08T | 13 | M22×1.5 | 27 | 22.8 | 52 | |
S20191-24-10 | 16 | M24×1.5 | 30 | 25.5 | 56.5 | |
S20191-27-10T | 16 | M27×1.5 | 32 | 23.5 | 54 | |
S20191-30-12T | 19 | M30×2 | 36 | 24.5 | 67 | |
S20191-39-16T | 25 | M39×2 | 46 | 29.5 | 72 | |
S20191-45-20T | 32 | M45×2 | 55 | 31.5 | 85 | |
S20191-52-24T | 38 | M52×2 | 60 | 33 | 100 |
Product detail pictures:
Related Product Guide:
Things to Know About Pipe Fitting Works
How to Replace a Hydraulic Hose Fitting
Fast and very good quotations, informed advisers to help you choose the correct merchandise that suits all your preferences, a short creation time, responsible excellent command and different companies for paying and shipping affairs for OEM Customized wholesale 20191-T Swaged Hose Fiting for Bulgaria Factory, The product will supply to all over the world, such as: Burundi, Puerto Rico, Nairobi, Many kinds of different solutions are available for you to choose, you can do one-stop shopping here. And customized orders are acceptable. Real business is to get win-win situation, if possible, we would like to deliver more support for customers. Welcome all nice buyers communicate details of solutions with us!!
PLIDCO® Riser Weld Ends are designed to simplify the replacement of underwater risers on offshore gas and oil lines–without welding underwater. This fitting has additional clamping and thrust screws to provide a seal for high pressure and for resisting extreme end-pull.
Installation is rapid. The Weld End is socket-welded at the surface to the new replacement riser and lowered into the water. A diver cuts out the old riser, stabs the new fitting over the cut-off pipe, then tightens the clamping and thrust screws for a complete leakproof seal without welding.
The American Suspension Bolt on Neck Kit is designed for quick and easy installation with a focus on strength and stability.
The full kit includes – Neck, Stem, Trees, Bushings, Fork Caps, and Bearings. $1399 MSRP.
This kit is patent pending and made in the United States of America.
The American Suspension Bolt on Neck Kit for Harley bagger motorcycles gives great handling because the geometry is very similar to a weld on kit. The mounting system includes several redundant mounts for maximum reliability. Simple installation is shown in the video. It should take less than 10 minutes to install the neck (a few hours to remove and replace the fairing, wheels and handlebar. The specs for a 26” wheel kit are +4° in the neck and 7°. So the total neck rake ends up at 37°. Geometry is Similar to the American Suspension weld in neck that is specifically designed for the 26″ wheel. The specs for a 30” wheel are +9° in the neck and 12° total in the trees. This is similar to what many weld on kits are using and will work great on your Harley Davidson Motorcycle. Cutting and welding your frame permanently changes your motorcycle. This almost always instantly voids your warranty. A bolt-on/bolt-off kit can easily be removed at any time and put back to stock condition.
This is about the same as leading weld on kits – but NO WELDING, NO CUTTING, JUST BOLT IT ON. You can unbolt the kit if you get tired of the big wheel and put your Harley back to stock.
Fits 2009-2013 Touring models
By jari dedenroth from Cologne - 2017.11.12 12:31
Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
By Cheryl from Barcelona - 2018.04.25 16:46