Hot Selling for 14211 Swaged Hose Fiting for Borussia Dortmund Manufacturer
Hot Selling for 14211 Swaged Hose Fiting for Borussia Dortmund Manufacturer Detail:
ORFS MALE
PART NUMBER |
HOSE
|
THREAD T |
B mm |
L mm |
A mm |
H1 mm |
H2 mm |
||
|
DN |
In |
SIZE |
|
|
|
|
|
|
S142A0 – 04 – 04 | 6 | 1/4″ | 04 | 9/16″ – 18 | 4,4 | 24 | 9,8 | 17 | |
S142A0 – 06 – 06 | 10 | 3/8″ | 06 | 11/16″ – 16 | 6,7 | 27,6 | 11,2 | 19 | |
S142A0 – 08 – 08 | 12 | 1/2″ | 08 | 13/16″ – 16 | 9,6 | 30,3 | 12,8 | 22 | |
S142A0 – 10 – 10 | 16 | 5/8″ | 10 | 1″ – 14 | 12,3 | 34,8 | 15,5 | 27 | |
S142A0 – 12 – 12 | 20 | 3/4″ | 12 | 1.3/16″ – 12 | 15,5 | 38,5 | 17 | 32 | |
S142A0 – 16 – 16 | 25 | 1″ | 16 | 1.7/16″ – 12 | 20,6 | 43,8 | 17,5 | 41 | |
S142A0 – 20 – 20 | 32 | 1.1/4″ | 20 | 1.11/16″ – 12 | 26 | 46 | 17,5 | 46 | |
S142A0 – 24 – 24 | 40 | 1.1/2″ | 24 | 2″ – 12 | 32 | 50 | 17,5 | 55 |
Product detail pictures:
Related Product Guide:
Understanding Hydraulic Hose Fittings
Things to Know About Pipe Fitting Works
The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for Hot Selling for 14211 Swaged Hose Fiting for Borussia Dortmund Manufacturer, The product will supply to all over the world, such as: Guinea, Kenya, Chile, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
This DIY Wood Floating Shelf project is a great one for anyone looking to get into woodworking and for the more advanced, alike. It’s very budget friendly, does not take long to make, and they add a nice touch to any wall. Learn how to make your wood floating shelves!
For more info, project photos, and downloadable plans check out:
https://www.diypete.com/FloatingShelves
Download Plans: https://gumroad.com/l/FloatingShelves
Vinegar and Steel Wool Tutorial Video: https://www.youtube.com/watch?v=tqFnBcKUdhA
*Note that these are affiliate links, meaning that when you buy something that is recommended below, it helps support the Channel. Thanks in advance!
*Tools Needed
Circular Saw – https://amzn.to/1OxNa7k
Table Saw – https://amzn.to/1X7Eje5
Drill – https://amzn.to/1OxMfnt
Kreg Jig – https://amzn.to/1X7Bd9H
Nail Gun – https://amzn.to/1R0RUDB
Clamps – https://amzn.to/1LwiDEs
Cut All of the Wood Pieces
We’ll start this project by marking and making cuts for all of the different pieces for the wood floating shelf. It basically consists of the 2×4 wood frame that screws into the studs in your wall and also the cedar picket shelf box that slides onto the frame. Take a look at the cut list in the free plans for dimensions and guidance. Sand the boards, once they’re cut to size.
Start Assembly, Making the Frame First
Once you have all of your pieces, we’ll make the 2×4 wood frame that’ll screw into the wall. Kreg Jig (pocket hole joinery) the short boards onto the longer board. Also screw in 3” wood screws from the opposite side, for more security. This frame will be completely hidden on the inside of the cedar shelf box, so once it’s made there is no need to finish this. You can leave it all rough.
Assemble the Cedar Box Shelf
Then we’ll put together the cedar box that will slide over the 2×4 frame, becoming the main shelf and the most visible part of this project. Dry fit all of the pieces to make sure your cuts were accurate, then add wood glue to the joints. Nail everything together with 1 ¼” nails and then let the glue dry.
Sand, Finish, and Let Cure
Sand the cedar box down to at least 220 grit with your orbital sander. The finishing process that I did for this project was the steel wool and vinegar solution/stain. Let your solution work its magic for a while and once to the desired color, seal it all up with a water-based spray polyurethane. The water-based sealer ensures that you won’t change the effect, patina, and color of the steel wool and vinegar solution.
Install the 2×4 Frame and the Cedar Shelf
Once the finishing process is done and everything has dried to the manufacturer’s recommended time, we can install it! We’ll first find the studs in the wall, should be about 16” apart. Then we’ll screw the 2×4 frame into the wall with 2 3” wood screws for each connection to the stud. Slide the cedar box shelf on and you’re done!
*Note: If you’re wanting a more secure shelf (maybe the kids could pull the shelf off of the frame) you can simply screw the shelf onto the 2×4 frame from the underside or topside.
Enjoy!
You’ve done the work, now reap the benefits of your DIY Wood Floating Shelf or Shelves, in my case. Add what you want to them and share this project with your friends. Thanks for following along and be sure to check out the free, downloadable plans.
–
Looking for more DIY videos? Be sure to check out our channel and subscribe for updates! We post a weekly tutorial every Thursday.
Looking for woodworking, concrete working, and other DIY projects plans to follow? You can download plans for free at https://gumroad.com/DIYPETE
Facebook: https://facebook.com/DiyProjectsWithPete
Instagram: https://instagram.com/diypete
DIYPETE.com
1627 W Main Street Suite 182
Bozeman, Montana 59715
By Roberta from Kenya - 2017.02.28 14:19
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Gustave from Holland - 2018.12.30 10:21