Factory supplied 22641-XX-XX Swaged Hose Fiting Wholesale to Bangalore
Factory supplied 22641-XX-XX Swaged Hose Fiting Wholesale to Bangalore Detail:
45° BSP O’RING FEMALE 60° CONE
PART NUMBER |
HOSE
|
THREAD T |
B mm |
L mm |
A mm |
M mm |
H2 mm |
||
|
DN |
In |
SIZE |
|
|
|
|
|
|
S226C1 – 04 – 04OR | 6 | 1/4″ | 04 | 1/4″ – 19 | 4 | 35,2 | 5,2 | 14,7 | 19 |
S226C1 – 06 – 06OR | 10 | 3/8″ | 06 | 3/8″ – 19 | 7 | 40,9 | 6 | 17,3 | 22 |
S226C1 – 08 – 08OR | 12 | 1/2″ | 08 | 1/2″ – 14 | 9,3 | 47,6 | 6,5 | 19,9 | 27 |
S226C2 – 10 – 10OR | 16 | 5/8″ | 10 | 5/8″ – 14 | 12 | 56,8 | 9,7 | 25,8 | 30 |
S226C2 – 12 – 12OR | 20 | 3/4″ | 12 | 3/4″ – 14 | 15 | 67,8 | 9 | 30,3 | 32 |
S226C2 – 16 – 16OR | 25 | 1″ | 16 | 1″ – 11 | 19,5 | 84,4 | 10,5 | 37,4 | 38 |
S226C2 – 16 – 20OR | 25 | 1″ | 16 | 1.1/4″ – 11 | 26 | 90,1 | 10,1 | 41,6 | 50 |
S226C2 – 20 – 20OR | 32 | 1.1/4″ | 20 | 1.1/4″ – 11 | 26 | 100,7 | 10,1 | 44,8 | 50 |
S226C2 – 20 – 24OR | 32 | 1.1/4″ | 20 | 1.1/2″ – 11 | 32 | 101,3 | 12,5 | 45,5 | 55 |
S226C2 – 24 – 24OR | 40 | 1.1/2″ | 24 | 1.1/2″ – 11 | 32 | 112,5 | 12,5 | 49 | 55 |
S226C2 – 24 – 32OR | 40 | 1.1/2″ | 24 | 2″ – 11 | 42 | 116 | 16,1 | 52,5 | 70 |
S226C2 – 32 – 32OR | 50 | 2″ | 32 | 2″ – 11 | 42 | 132,9 | 16,1 | 55,7 | 70 |
Product detail pictures:
Related Product Guide:
Understanding Hydraulic Hose Fittings
Importance of PVC Fittings
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate inside our success for Factory supplied 22641-XX-XX Swaged Hose Fiting Wholesale to Bangalore, The product will supply to all over the world, such as: Myanmar, Switzerland, Karachi, We'll supply much better products with diversified designs and expert services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.
I decided to make a jaw crusher to process some construction debris I had laying around. I began the project with the idea that it would be mobile. I started with an old boat trailer and started building accordingly. I used pillow blocks and 2 bolt flanges to support the 1.5″ driveshaft. The jaw has 3/4″ swing at the top and about 1/2″ an inch at the bottom. It uses a 5 hp briggs engine for power, a trailer tire and rim for a flywheel, and a yamaha blaster chain drive hub with the sprocket removed.
By Dominic from Auckland - 2017.06.29 18:55
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Poppy from Benin - 2017.06.29 18:55