Factory directly provide 20491 Swaged Hose Fiting for Argentina Importers

Short Description:

90° O’RING METRIC FEMALE SWEPT ELBOW 24° CONE LIGHT TYPE DIN 3865 (DKOL- 90)    PART NUMBER HOSE THREAD T PIPE B mm L mm A mm M mm H2 mm   DN In SIZE               S204B1 – 03 – 12 5 3/16″ 03 M12x1,5 6 3 26.5 1,2 30,6 14 S204B1 – 04 – 14 6 1/4″ 04 M14x1,5 8 4 28 1,8 33,2 17 S204B1 – 04 – 16 6 1/4″ 04 M16x1,5 10 5,5 28 2,3 34,7 19 S204B1 – 05 – 16 8 5/16″ 05 ...


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking towards the theory of Super Good quality, Satisfactory service ,We are striving to become a superb business enterprise partner of you for Hydraulic Pipe Fittings Discount, Hose Hydraulic Services Ltd, Ferrule For 1SN Hose For Britishs, As a key enterprise of this industry, our company makes efforts to become a leading supplier, based on the faith of professional quality & worldwide service.
Factory directly provide 20491 Swaged Hose Fiting for Argentina Importers Detail:

90° O’RING METRIC FEMALE SWEPT ELBOW 24° CONE LIGHT TYPE DIN 3865 (DKOL- 90) 

3

 

PART NUMBER

HOSE

THREAD

T

PIPE

B

mm

L

mm

A

mm

M

mm

H2

mm

 

DN

In

SIZE

 

 

 

 

 

 

 

S204B1 – 03 – 12 5 3/16″ 03 M12x1,5 6 3 26.5 1,2 30,6 14
S204B1 – 04 – 14 6 1/4″ 04 M14x1,5 8 4 28 1,8 33,2 17
S204B1 – 04 – 16 6 1/4″ 04 M16x1,5 10 5,5 28 2,3 34,7 19
S204B1 – 05 – 16 8 5/16″ 05 M16x1,5 10 5,5 31 2,3 32,7 19
S204B1 – 05 – 18 8 5/16″ 05 M18x1,5 12 7 31 2,5 33,5 22
S204B1 – 06 – 18 10 3/8″ 06 M18x1,5 12 7 34 2,5 36,7 22
S204B1 – 06 – 22 10 3/8″ 06 M22x1,5 15 9,5 34 2,5 39,9 27
S204B1 – 08 – 22 12 1/2″ 08 M22x1,5 15 9,3 40 2,5 43,8 27
S204B1 – 08 – 26 12 1/2″ 08 M26x1,5 18 12 40 2,5 46,3 32
S204B1 – 10 – 26 16 5/8″ 10 M26x1,5 18 12 40 2,5 54,3 32
S204B1 – 12 – 30 20 3/4″ 12 M30x2 22 15 55 3,5 61,9 36
S204B1 – 12 – 36 20 3/4″ 12 M36x2 28 19,5 55 3,7 65,1 41
S204B1 – 16 – 36 25 1″ 16 M36x2 28 19,5 73 3,7 72 41
S204B1 – 20 – 45 32 1.1/4″ 20 M45x2 35 26 89,8 4 87,4 50
S204B1 – 24 – 52 40 1.1/2″ 24 M52x2 42 32 103 4,5 101,5 60
S204B2 – 06 – 16 10 3/8″ 06 M16x1,5 10 5,5 34 2 42,4 19

Product detail pictures:

Factory directly provide 20491 Swaged Hose Fiting for Argentina Importers detail pictures

Factory directly provide 20491 Swaged Hose Fiting for Argentina Importers detail pictures


Related Product Guide:
Tube Fittings and Pipe Fittings – Double Ferrule Tube Fittings
How to Replace a Hydraulic Hose Fitting

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory directly provide 20491 Swaged Hose Fiting for Argentina Importers, The product will supply to all over the world, such as: Washington, Swaziland, Victoria, With high quality, reasonable price, on-time delivery and customized & personalized services to help customers achieve their goals successfully, our company has got praise in both domestic and foreign markets. Buyers are welcome to contact us.


  • In this video we show How to replace the oxygen (O2) sensor also known has Air Fuel Ratio sensor on the Nissan Frontier V6 (3300 – VG33E) engine.Here you will see the difference between Bank #1 (right side)and Bank #2(left side) heated (4-wire) oxygen sensors. Replacing the oxygen sensor every 60-70,000 miles is an effort to help conserve fuel/gasoline.The oxygen sensor are not the only device to harness against waste consumption. The coolant temperature sensor at the thermostat housing reports to the computer, the computer commands the cooling fans through the fuel/relay box. Some model will be equipped with dual cooling fans. One for normal operation is the 1st fan. The 2nd fan is for air condition operation and over-heating conditions. If the Tstat remain stuck “close” the two fan will operate and coolant will overflow in its reserve container. The Tstat ONLY control engine temperature. The fans operation and gauge help radiates any heat or over heating base on ambient air temperature and operator.

    The oxygen sensor is a state EPA “enviromental term” all so known has a EGT – exhaust gas temperature sensor sends millivoltage(data) to the ecm – engine control module for fuel injector control and its flow rate(impedeance). The oxygen sensor key roll is to measure the combustion flame/temperature .the ideal temperature for anything above 75% throttle is .870mv – .900mv output at the exhaust gas temperature/oxygen sensor. The oxygen(o2) sensor also work in conjuction with the Mass Air Flow Meter/sensor for fuel injector control. So the oxygen sensor can also be conside a Air Fuel Ratio sensor and the Mass Air Flow meter is mounted on the intake manifold duct.

    M18 sensors – Install finger tight then 1/2 – 3/4 turn with wrench/ O2 sensor socket.26-33ft. lbs
    M12 sensors – Install finger tight then 3/4 – 1 turn with wrench / O2 sensor socket.13.2-17ft. lbs.

    APPLICATION: 2003 NISSAN FRONTIER EX, Xterra
    3300 CC ENGINE 4X4

    PLEASE – RATE – COMMENT AND SUBSCRIBE.

    * DO NOT drop or use an oxygen sensor that has been dropped as this may have caused shock damage to the ceramic cell.
    * DO NOT use any compound on or around the sensor unless labeled as oxygen sensor friendly products.
    * DO NOT use impact wrench or conventional socket type wrench to install sensor.
    * DO NOT allow sensor or lead wire to touch exhaust manifold or any other hot component.
    * DO NOT expose this product to water,oil,windshield cleaner, anti-corrosion oil,grease,terminal cleaner, etc.
    * DO NOT use leaded fuels, silicone or metal based additives
    * DO NOT store under high humidity conditions will promote rusting.
    WARNING : Anti-seize compound may cause irritation to the skin or eyes. In case of contact, wash affected area with soap and water. In case of eye contact, Flush with water for 15 minutes. If irritation persists, consult a physician. If swallowed, DO NOT induce vomiting.

    KEEP OUT OF REACH OF CHILDREN.

    As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Melissa from Mombasa - 2017.03.28 16:34
    Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Leona from Slovakia - 2017.06.29 18:55

    Related Products

    WhatsApp Online Chat !