Big discounting CC-W Metric Thread Bite Type Tube Fitting to California Manufacturers
Big discounting CC-W Metric Thread Bite Type Tube Fitting to California Manufacturers Detail:
RUN TEE FITTINGS WITH SWIVEL NUT
PART NOMBER
|
MPa
|
TUBE O D.
|
d1 |
L1 |
l1 |
l2 |
S2 |
S3 |
O型圈 |
bar
|
CC-06L | L | 06 | M12x1.5 | 27 | 12.0 | 26.0 | 14 | 12 | OR4.5×1.5 | 315 |
CC-08L | 08 | M14x1.55 | 29 | 14.0 | 27.5 | 17 | 12 | OR6.5×1.5 | 315 | |
CC-10L | 10 | M16x1.55 | 30 | 15.0 | 29.0 | 19 | 14 | OR8x1.5 | 315 | |
CC-12L | 12 | M18x1.5 | 32 | 17.0 | 29.5 | 22 | 17 | OR10x1.5 | 315 | |
CC-15L | 15 | M22x1.5 | 36 | 21.0 | 32.5 | 27 | 19 | OR12x2 | 315 | |
CC-18L | 18 | M26x1.5 | 40 | 23.5 | 35.5 | 32 | 24 | OR15x2 | 315 | |
CC-22L | 22 | M 30×2 | 44 | 27.5 | 38.5 | 36 | 27 | OR20x2 | 160 | |
CC-28L | 28 | M 36×2 | 47 | 30.5 | 41.5 | 41 | 36 | OR26x2 | 160 | |
CC-35L | 35 | M 45×2 | 56 | 34.5 | 51.0 | 50 | 41 | OR32x2.5 | 160 | |
CC-42L | 42 | M 52×2 | 63 | 40.0 | 56.0 | 60 | 50 | OR38x2.5 | 160 | |
CC-06S | S | 06 | M14x1.5 | 31 | 16.0 | 27.0 | 17 | 12 | OR4.5×1.5 | 630 |
CC-08S | 08 | M16x1.5 | 32 | 17.0 | 27.5 | 19 | 14 | OR6.5×1.5 | 630 | |
CC-10S | 10 | M18x1.5 | 34 | 17.5 | 30.0 | 22 | 17 | OR8x1.5 | 630 | |
CC-12S | 12 | M20x1.5 | 38 | 21.5 | 31.0 | 24 | 17 | OR10x1.5 | 630 | |
CC-14S | 14 | M22x1.5 | 40 | 22.0 | 35.0 | 27 | 19 | OR11x2 | 630 | |
CC-16S | 16 | M24x1.5 | 43 | 24.5 | 36.5 | 30 | 24 | OR13x2 | 400 | |
CC-20S | 20 | M 30×2 | 48 | 26.5 | 44.5 | 36 | 27 | OR16.3×2.4 | 400 | |
CC-25S | 25 | M 36×2 | 54 | 30.0 | 50.0 | 46 | 36 | OR20.3×2.4 | 400 | |
CC-30S | 30 | M 42×2 | 62 | 35.5 | 55.0 | 50 | 41 | OR25.3×2.4 | 400 | |
CC-38S | 38 | M 52×2 | 72 | 41.0 | 63.0 | 60 | 50 | OR33.3×2.4 | 315 |
Product detail pictures:
Related Product Guide:
How to Replace a Hydraulic Hose Fitting
Tube Fittings and Pipe Fittings – Double Ferrule Tube Fittings
Our corporation insists all along the quality policy of product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff plus the consistent purpose of reputation very first, purchaser first for Big discounting CC-W Metric Thread Bite Type Tube Fitting to California Manufacturers, The product will supply to all over the world, such as: Zambia, Jordan, Bulgaria, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 Pontiac Grand Prix GT
Please subscribe here: https://goo.gl/kXkkpy
Please donate here if this video was helpful
Click LINK https://www.paypal.me/FixItAngel
Check out my online store for tools to purchase
https://www.amazon.com/shop/fixitangel
Purchase any of my apparel and a portion of my monthly earnings will go to Catholic Charities here in Las Vegas
Click LINK https://www.cafepress.com/fixitangel
You can also follow me in:
Facebook https://www.facebook.com/fixitangel328
Twitter https://twitter.com/FixItAngel
Instagram https://www.instagram.com/fixitangel/
Front brake pads https://goo.gl/MGT3Jz
Front Rotors https://goo.gl/ViNZPf
Hydraulic Jack https://goo.gl/a82j5S
Jack Stands https://goo.gl/h8WK2p
1/2″ Drive Air Impactool https://goo.gl/nF5dal
ScrewDriver Set https://goo.gl/PA5G7x
Battery Filler https://goo.gl/hLKaYV
Extra Long Box End Wrench Set https://goo.gl/b4BVpQ
1/2″ Drive Metric Deep Socket Set https://goo.gl/5MeZdh
1/2″ Drive Flex Head Ratchet https://goo.gl/JB2LxS
Metric GearWrench Ratcheting Set https://goo.gl/IybcN2
Kneeling Pad https://goo.gl/Kt1qur
Wire Brush https://goo.gl/Zb1pGc
Anti-Seize Grease https://goo.gl/8iW1LQ
Replacing worn front brake pads with aftermarket pads and resurfacing the front rotors on a 2003 Pontiac Grand Prix
The caliper bracket has to be torqued at 133 ft. lbs., because the spindle is aluminum.
I did not use the brake hardware because it did not need it. Most of the time from my experience working at the dealer, the aftermarket hardware doe not fit correctly.
By not replacing the old hardware, it does not affect the brake pads or braking. You can replace it if you want to for your peace of mind.
The information contained in this video is for general guidance, not responsible for any errors or injuries that you have done. GoPro Session 4 and iPhone 5 was used to do this video.
Artist: AN6
Text: AN6
Beat: Xclusive Production
By Johnny from Kenya - 2018.09.08 17:09
With a positive attitude of regard the market, regard the custom, regard the science, the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Ellen from California - 2017.05.02 11:33