18 Years Factory offer 1DO Metric Thread Bite Type Tube Fitting to Guinea Manufacturer
18 Years Factory offer 1DO Metric Thread Bite Type Tube Fitting to Guinea Manufacturer Detail:
UN,UNF THREAD STUD ENDS WITH O-RING SEALING
|
PART NOMBER
|
Mpa
|
TUBE O D.
|
G |
d3 |
i |
l1 |
L1 |
S1 |
S2 |
O型圈 |
bar
|
| 1CO-08L-04 |
L |
08 |
7/16-20UNF-2A |
14.4 |
9.0 |
10.0 |
25 | 17 | 17 | OR8.92X1.83 |
315 |
| 1CO-10L-04 |
|
10 |
7/16-20UNF-2A |
14.4 |
10.0 |
11.0 |
26 | 17 | 19 | OR8.92X1.83 |
315 |
| 1CO-12L-06 |
|
12 |
9/16-18UNF-2A |
17.6 |
10.0 |
11.0 |
26 | 19 | 22 | OR11.9X1.98 |
315 |
| 1CO-12L-08 |
|
12 |
3/4-16UNF-2A |
22.3 |
11.0 |
13.0 |
28 | 24 | 22 | OR16.36X2.20 |
315 |
| 1CO-12L-10 |
|
12 |
7/8-14UNF-2A |
25.5 |
12.7 |
14.3 |
29 | 27 | 22 | OR19.18X2.46 |
315 |
| 1CO-15L-08 |
|
15 |
3/4-16UNF-2A |
22.3 |
11.0 |
14.0 |
29 | 24 | 27 | OR16.36X2.20 |
315 |
| 1CO-15L-10 |
|
15 |
7/8-14UNF-2A |
25.5 |
12.7 |
15.3 |
30 | 27 | 27 | OR19.18X2.46 |
315 |
| 1CO-18L-08 |
|
18 |
3/4-16UNF-2A |
22.3 |
11.0 |
14.5 |
31 | 27 | 32 | OR16.36X2.20 |
315 |
| 1CO-18L-10 |
|
18 |
7/8-14UNF-2A |
25.5 |
12.7 |
14.8 |
31 | 27 | 32 | OR19.18X2.46 |
315 |
| 1CO-22L-10 |
|
22 |
7/8-14UNF-2A |
25.5 |
12.7 |
16.8 |
33 | 32 | 36 | OR19.18X2.46 |
160 |
| 1CO-22L-12 |
|
22 |
1-1/16-12UN-2A |
31.9 |
15.0 |
16.5 |
33 | 32 | 36 | OR23.47X2.95 |
160 |
| 1CO-22L-16 |
|
22 |
1-5/16-12UN-2A |
38.2 |
15.0 |
17.5 |
34 | 41 | 36 | OR29.74X2.95 |
160 |
| 1CO-28L-12 |
|
28 |
1-1/16-12UN-2A |
31.9 |
15.0 |
17.5 |
34 | 41 | 41 | OR23.47X2.95 |
160 |
| 1CO-28L-16 |
|
28 |
1-5/16-12UN-2A |
38.2 |
15.0 |
17.5 |
34 | 41 | 41 | OR29.74X2.95 |
160 |
| 1CO-35L-16 |
|
35 |
1-5/16-12UN-2A |
38.2 |
15.0 |
17.5 |
39 | 46 | 50 | OR37.46X2.95 |
160 |
| 1CO-35L-20 |
|
35 |
1-5/8-12UN-2A |
47.7 |
15.0 |
17.5 |
39 | 50 | 50 | OR37.46X3 |
160 |
| 1CO-42L-20 |
|
42 |
1-5/8-12UN-2A |
47.7 |
15.0 |
19.0 |
42 | 55 | 60 | OR37.46X3 |
160 |
| 1CO-08S-04 |
S |
08 |
7/16-20UNF-2A |
16.0 |
9.0 |
15.0 |
30 | 17 | 19 | OR8.92X1.83 |
630 |
| 1CO-10S-06 |
10 |
9/16-18UNF-2A |
17.6 |
10.0 |
14.5 |
31 | 19 | 22 | OR11.9X1.98 |
630 |
|
| 1CO-12S-06 |
12 |
9/16-18UNF-2A |
17.6 |
10.0 |
14.5 |
31 | 22 | 24 | OR11.9X1.98 |
630 |
|
| 1CO-12S-08 |
12 |
3/4-16UNF-2A |
22.3 |
11.0 |
17.5 |
34 | 24 | 24 | OR16.36X2.20 |
630 |
|
| 1CO-16S-08 |
16 |
3/4-16UNF-2A |
22.3 |
11.0 |
15.5 |
34 | 24 | 30 | OR16.36X2.20 |
400 |
|
| 1CO-16S-10 |
16 |
7/8-14UNF-2A |
25.5 |
12.7 |
18.8 |
37 | 27 | 30 | OR19.18X2.46 |
400 |
|
| 1CO-20S-08 |
20 |
3/4-16UNF-2A |
22.3 |
11.0 |
20.5 |
42 | 32 | 36 | OR16.36X2.20 |
400 |
|
| 1CO-20S-10 |
20 |
7/8-14UNF-2A |
25.5 |
12.7 |
20.8 |
42 | 32 | 36 | OR19.18X2.46 |
400 |
|
| 1CO-20S-12 |
20 |
1-1/16-12UN-2A |
31.9 |
15.0 |
20.5 |
42 | 32 | 36 | OR23.47X2.95 |
400 |
|
| 1CO-25S-12 |
25 |
1-1/16-12UN-2A |
31.9 |
15.0 |
23.0 |
47 | 36 | 46 | OR23.47X2.95 |
400 |
|
| 1CO-25S-16 |
25 |
1-5/16-12UN-2A |
38.2 |
15.0 |
23.0 |
47 | 41 | 46 | OR29.74X2.95 |
400 |
|
| 1CO-30S-16 |
30 |
1-5/16-12UN-2A |
38.2 |
15.0 |
23.5 |
50 | 46 | 50 | OR29.74X2.95 |
400 |
|
| 1CO-30S-20 |
30 |
1-5/8-12UN-2A |
47.7 |
15.0 |
23.5 |
50 | 50 | 50 | OR37.46X3 |
400 |
|
| 1CO-38S-20 |
38 |
1-5/8-12UN-2A |
47.7 |
15.0 |
26.0 |
57 | 55 | 60 | OR37.46X3 |
315 |
Product detail pictures:
Related Product Guide:
Importance of PVC Fittings
Things to Know About Pipe Fitting Works
We pursue the management tenet of Quality is remarkable, Company is supreme, Name is first, and will sincerely create and share success with all clientele for 18 Years Factory offer 1DO Metric Thread Bite Type Tube Fitting to Guinea Manufacturer, The product will supply to all over the world, such as: Morocco, Japan, Montpellier, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
Question posed was “Why do we need a water tank if we are using the customers water supply?”
Answer:
The tank I refer to is our “buffer tank” on our trailer. I HAVE to use a tank even though we use customers water source. The “Buffer tank” is needed due to flow variations from the water source. Our machine has an 8 gpm pump. The source may not be providing sufficient flow to feed our pump. This can cause a cavitation and damage the pump. So we receive water from the source into a “buffer tank” and then draw from the tank. If the original source is flowing perhaps 7 gpm (-1gpm deficit) and we already have 100 gallons of “buffer”, we will get 100 minutes of constant run time before having to stop and let the source catch up. Since, normally, we don’t have constant open trigger, we usually can continue work without interuption. However, if the source is flowing say 10 gpm or we aren’t constantly on the trigger pulling water, the tank will overflow with excess. We have a float valve in the tank to shut off the source so water is not wasted.
https://www.firstchoicepowerwashing.com
https://www.facebook.com/powerwash
https://plus.google.com/112038666693158607842?rel=author
By Beulah from Bangladesh - 2018.10.09 19:07
The company keeps to the operation concept scientific management, high quality and efficiency primacy, customer supreme, we have always maintained business cooperation. Work with you,we feel easy!
By Iris from Brisbane - 2018.02.21 12:14
