12 Years Factory wholesale BD-W Metric Thread Bite Type Tube Fitting Wholesale to Angola
12 Years Factory wholesale BD-W Metric Thread Bite Type Tube Fitting Wholesale to Angola Detail:
BRANCH TEE FITTINGS WITH SWIVEL NUT
|
PART NOMBER
|
MPa
|
TUBE O D.
|
d1 |
L1 |
l1 |
l2 |
S2 |
S3 |
O型圈 |
bar
|
| BC-06L | L | 06 | M12x1.5 | 27 | 12.0 | 26.0 | 14 | 12 | OR4.5×1.5 | 315 |
| BC-08L | 08 | M14x1.55 | 29 | 14.0 | 27.5 | 17 | 12 | OR6.5×1.5 | 315 | |
| BC-10L | 10 | M16x1.55 | 30 | 15.0 | 29.0 | 19 | 14 | OR8x1.5 | 315 | |
| BC-12L | 12 | M18x1.5 | 32 | 17.0 | 29.5 | 22 | 17 | OR10x1.5 | 315 | |
| BC-15L | 15 | M22x1.5 | 36 | 21.0 | 32.5 | 27 | 19 | OR12x2 | 315 | |
| BC-18L | 18 | M26x1.5 | 40 | 23.5 | 35.5 | 32 | 24 | OR15x2 | 315 | |
| BC-22L | 22 | M 30×2 | 44 | 27.5 | 38.5 | 36 | 27 | OR20x2 | 160 |
Product detail pictures:
Related Product Guide:
Things to Know About Pipe Fitting Works
Understanding Hydraulic Hose Fittings
Our enterprise since its inception, usually regards product top quality as business life, repeatedly enhance manufacturing technology, make improvements to product excellent and continuously strengthen enterprise total high quality administration, in strict accordance with all the national standard ISO 9001:2000 for 12 Years Factory wholesale BD-W Metric Thread Bite Type Tube Fitting Wholesale to Angola, The product will supply to all over the world, such as: Malaysia, Milan, Qatar, we have complete material production line, assembling line , quality control system, and the most importantly, we have many patents technology and experienced technical&production team, professional sales service team. With all those advantages, we are going to createthe reputable international brand of nylon monofilaments, and spreading our products to every corner of the world. We are keep moving and try our best to serve our customers.
Message me if you have any questions or want an ASA on/off valve.
Before you put it on the paintball tank or in your fish tank:
1.Make sure the asa on/off is completely counter clockwise or completely off of the setup itself
2. make sure the needle valve is completely closed
3. screw on(by hand) the ASA on/off setup onto the paintball tank.
4. turn the top knob of the ASA on/off and check the pressure gauge
5. place the end of the CO2 tubing in a bucket and adjust(VERY SLOWLY) the needle valve to get the bps. Adjust it VERY SLOWLY.
6. Then you can attach diffusers, bubble counters, check valves, whatever you want after you have the bps down and have figured out the tuning on the needle valve.
-Ben
By Christopher Mabey from America - 2018.03.03 13:09
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Martin Tesch from Jeddah - 2017.11.01 17:04
