12 Years Factory wholesale BD-W Metric Thread Bite Type Tube Fitting for luzern Manufacturer
12 Years Factory wholesale BD-W Metric Thread Bite Type Tube Fitting for luzern Manufacturer Detail:
BRANCH TEE FITTINGS WITH SWIVEL NUT
PART NOMBER
|
MPa
|
TUBE O D.
|
d1 |
L1 |
l1 |
l2 |
S2 |
S3 |
O型圈 |
bar
|
BC-06L | L | 06 | M12x1.5 | 27 | 12.0 | 26.0 | 14 | 12 | OR4.5×1.5 | 315 |
BC-08L | 08 | M14x1.55 | 29 | 14.0 | 27.5 | 17 | 12 | OR6.5×1.5 | 315 | |
BC-10L | 10 | M16x1.55 | 30 | 15.0 | 29.0 | 19 | 14 | OR8x1.5 | 315 | |
BC-12L | 12 | M18x1.5 | 32 | 17.0 | 29.5 | 22 | 17 | OR10x1.5 | 315 | |
BC-15L | 15 | M22x1.5 | 36 | 21.0 | 32.5 | 27 | 19 | OR12x2 | 315 | |
BC-18L | 18 | M26x1.5 | 40 | 23.5 | 35.5 | 32 | 24 | OR15x2 | 315 | |
BC-22L | 22 | M 30×2 | 44 | 27.5 | 38.5 | 36 | 27 | OR20x2 | 160 |
Product detail pictures:
Related Product Guide:
Importance of PVC Fittings
Tube Fittings and Pipe Fittings – Double Ferrule Tube Fittings
Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for 12 Years Factory wholesale BD-W Metric Thread Bite Type Tube Fitting for luzern Manufacturer, The product will supply to all over the world, such as: Bolivia, Poland, Italy, Till now, the goods list has been updated regularly and attracted clients from around the globe. Detailed facts is often obtained in our web-site and you'll be served with premium quality consultant service by our after-sale group. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. Company go to to our factory in Brazil is also welcome at any time. Hope to obtain your inquiries for any pleased co-operation.
Using a propane torch and https://MuggyWeld.com’s SSF-6 56% silver solder, Mike brazes stainless steel tube to a steel plate. The resulting bond is a super strong 70,000 psi. When using large or thicker steel or stainless steel you may need to use oxy mapp gas, oxygen propane or an oxyacetylene torch. Always preheat your metals when brazing or soldering. Heating adjacent to the work area will slow down the surrounding area from pulling heat away from the joint to be silver soldered. When the metals start to trun color you can apply the flux and continue heating until the metals start turning red, then simply apply the flame to both the parent steels and the rod to flow the SSF-6 in to the desired joint.
SSF-6 finishes beautifully, without a need for grinding or machining, and can be applied with a propane, oxy-acet, or MAPP gas torch.
Please read all instructions prior to use at: https://www.muggyweld.com/wp-content/uploads/2017/04/SSF-6-instructions.pdf
For more videos and information, or to order, visit https://MuggyWeld.com
International customers, please order at: https://www.ebay.com/usr/muggyweld
_________________
Please visit https://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at https://muggyweld.com/safety-guidelines.
Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.
MSDS sheets available with purchase from MuggyWeld.com, upon request.
Creating a successful electrofusion joint can be done in just a few simple steps. With our lightweight technology and the ability to install both vertically and horizontally allows for greater flexibility for the end user.
Once the pipe is correctly prepared and peeled place into the electrofusion fittings and fixate appropriately. Then plug the welding pins into the fitting, scan the barcode, start the welding process and wait for the process to complete. An easy way of telling the weld is successful is the visibility of our fusion indicators that pop up on either side of the fusion weld.
For more information visit our website:
https://www.gfps.com/appgate/ecat/common_flow/10005H/COM/en/110019/110084/index.html
Imprint:
https://www.gfps.com/content/gfps/com/en/service/footer/imprint.html
Disclaimer:
https://www.gfps.com/content/gfps/com/en/service/footer/disclaimer_gfps.html
By Deborah from Mozambique - 2018.06.18 17:25
We have been looking for a professional and responsible supplier, and now we find it.
By Nick from Lithuania - 2018.11.04 10:32